|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|||
Effective Date July 1,2008
|
GUARDRAIL POST "SADDLE" TYPE DELINEATORS (See note 1) |
||
| Manufacturer | Product |
Approval Number |
| Duraflex Corporation Ringwood, NJ |
Flexx 2020 | 1390155A (see notes 1,2,3 and 4) |
| Astro Optics Corp. Wauwatosa, WI |
FR | 1390156A (see notes 1,2,3 and 4) |
| Filtrona Extrusion, Inc. | I-FLEX-16 | 1390157A (see notes 1,2,3 and 4) |
|
CONCRETE BARRIER OR GUARDRAIL BLOCKOUT "T-BARRIER" TYPE DELINEATIORS (See note 1) |
||
| Manufacturer | Product |
Approval Number |
| Duraflex Corporation Ringwood, NJ |
Railrider | 1390158A (see notes 1,2,3 and 4) |
| Astro Optics Corp. Wauwatosa, W |
FT | 1390159A (see notes 1,2,3 and 4) |
| Filtrona Extrusion, Inc. | T-16 | 1390160A (see notes 1,2,3 and 4) |
| Plastic Safety Systems | Quik-Mark | 1390161A (see notes 1,3,5 and 6) |
| Filtrona Extrusion, Inc | Big Dog PCBM | 1390162A (see notes 1,3,5 and 6) |
|
CONCRETE BARRIER SIDE MOUNT TYPE DELINEATORS |
||
|
Manufacturer |
Product |
Approval Number |
|
3M |
LDS-W346(white) and LDS-FY346 (fl. yellow) |
1390163A (see notes 1 and 7) |
Notes
1. All B-1 delineators shall be installed in accordance with the
recommendations of the manufacturer. The sheeting on all B-1 delineators
shall be pre-installed on the face(s) of the delineators by the manufacturer.
2. 4"x4" reflective face(s).
3. To be used only in the following color combinations ( as specified in the contract plans):
-white sheeting on the front only or front and back.
-white sheeting on the front and red sheeting on the back.
-fluorescent-yellow (if Type ASTM-IX) or yellow (if Type
ASTM-III) sheeting on the front only or front and back.
-fluorescent-yellow (if Type ASTM-IX) or yellow (if Type
ASTM-III) sheeting on the front and red sheeting on the back.
4. Sheeting used shall be Type ASTM-IX
5. 12" x 8" reflective face(s).
6. Sheeting shall be Type ASTM-III, reboundable or non-reboundable, per the manufacturer's recommendation.
7. The delineator shall be installed such that the top edge of the
delineator is approximately 6" below the top of the barrier. The color of
the delineator shall be white or fluorescent-yellow, as required, in order to
match the color of the edge line that the delineator is intended to supplement.
|
|
|
|
 |
 |
 |
|
|
West Virginia Department
of Transportation
Division of Highways - Materials Control, Soils and Testing Division 190 Dry Branch Rd • Charleston, WV 25306-6616 Phone: (304)558-3160 • Fax: (304)558-0253 General information and/or questions, please email info@dot.state.wv.us |
|