|
Number
|
Title
|
Effective Date
|
| 100s |
|
106.00.02
|
Procedure for Evaluation of New
Products for Use In Highway Construction
|
January 1995 |
|
HL_468
|
Excel Form for submission |
|
106.00.20 |
West Virginia Acceptance Plan
"A" Method of Estimating Percentage of Material of
Construction That Will Fall Within Specification Limits |
January 1995 |
|
106.03.50 |
General Information Guide for Quality
Assurance Testing
Revised December 2004 |
April 2000 |
|
107.00.40 |
Determination Criteria for
Monitoring Ground Vibrations in Residential Areas |
April 2007 |
|
107.02.22 |
Method of Test for Determining
Photometric Requirements of Hazard Warning Lights |
January 1995 |
|
107.07.20 |
Procedure for Determining Specification
Compliance of Hazard Warning Lights |
January 1995 |
|
107.07.21 |
Standard Method of Test for Determining
Specific Intensity and Specific Brightness of Reflex Reflectors and
Delineators |
January 1995 |
|
109.00.20 |
Basis for Charges for Additional
Testing |
April 2000 |
| 200s |
|
207.00.00
|
Procedure for Evaluating and Disposing
of Bedrock Core
|
January 1995
|
|
207.06.20 |
Chemical Analysis of Soil |
January 1995 |
|
207.07.20 |
Nuclear Field Density - Moisture Test
for Random Material Having Less Than 40% of +3/4 Inch Material |
October 1999 |
|
212.02.20 |
Procedure for Determining a Reduced
Unit Price to be Paid for Select Material for Back-Filling Which Does
Not Conform to Grading Requirements of Governing Specifications |
January 1995 |
| 300s |
|
300.00.51
|
Procedural Guidelines for Maintaining
Control Charts for Aggregate Gradation
|
February 2001
|
|
301.02.21 |
Method of Test for Determining
"R" Value and Cohesiometer Value of Asphalt Emulsion or
Cutback of Asphalt Primer on Treated Base Course (Cold Mix) |
January 1995 |
|
301.02.23 |
Use of Job Mix Chart to Adjust Bitumen
Content of Bituminous Treated Aggregate Base Course |
January 1995 |
|
301.03.20 |
Method of Test for Determination of
"R" Value, Bulk Specific Gravity Cohesion, Maximum Specific
Gravity and Air Void Value of Bituminous Treated Base Course (Hot Mix
and Cold Mix) |
January 1995 |
|
307.00.50 |
Guide for Quality Control and
Acceptance Plans for Base Course |
|
| 400s |
|
401.02.21
|
Calibration of Thermometer and
Pyrometer at Bituminous Concrete Mixing Plant (Replaced ML-11)
|
January 1995
|
|
401.02.22 |
Design Testing of Hot-Mix Asphalt |
March 2000 |
|
401.02.23 |
Quality Assurance of Bituminous Paving
Mixtures |
March 1996 |
|
401.02.24 |
Guide To Designing Hot-Mix Asphalt with
Recycled Asphalt Pavement |
January 1998 |
|
401.02.25 |
Certification of Asphalt and Tar
Shipping Terminals |
March 2000 |
|
401.02.26 |
District Revision of Bitumen Content In
Bituminous Concrete |
January 1995 |
| 401.02.27 |
Guide for
Contractors Quality Control of Hot-Mix Asphalt |
March 2000 |
| 401.02.28 |
Guide to
Designing Hot-Mix Asphalt Using Superpave Volumetric Design |
March 2000 |
| 401.02.29 |
Guideline for
Quality Control and Acceptance Requirements for Superpave Hot-Mix
Asphalt |
March 2000 |
|
401.03.50 |
Guide for Contractor's Quality Control
of Bituminous Concrete |
March 2000 |
|
401.05.20 |
Compaction Testing of Hot-Mix Asphalt
Pavement |
March 2000 |
|
402.02.20 |
Rapid Determination of the Polish
Susceptible Carbonate Particle Content in Aggregates |
January 1995 |
|
403.01.50 |
Procedure for Determining a Reduced
Unit Price To Be Paid for Penetration Macadam Which Does Not Conform to
the Grading Requirements of Governing Specifications |
January 1995 |
| 600s |
|
601.03.20
|
Chemical Determination of Cement
Content In Hardened Portland Cement Concrete
|
January 1995
|
|
601.03.50 |
Guide for Quality Control and
Acceptance Requirements for Portland Cement Concrete |
October 2006 |
|
601.03.51 |
Standard Method for Determination of of
the Total Solids In Portland Cement Concrete |
April 2005 |
|
601.03.52 |
Procedural Guidelines for Maintaining
Control Charts for Portland Cement Concrete |
January 1995 |
|
601.04.20 |
Curing Concrete Test Specimens In The
Field
|
February 2005
|
|
601.11.20 |
Calibration and Operation of Rolling
Ten Foot Straight Edge on Bridge Decks |
January 1995 |
|
603.02.10 |
Guide for Approval of Component Materials
At Precast and Prestressed Concrete Plants |
July 2007 |
|
603.10.40 |
Inspection
and acceptance procedures for Prestressed Concrete Bridge Beams |
July 2003 |
|
606.03.50 |
Procedure for Determining a Reduced
Unit Price To Be Paid for Underdrain Aggregate Which Does Not Conform To
The Grading Requirements of Governing Specifications |
January 1995 |
|
608.02.20 |
Qualitative Determination of Coating
Materials On Metal |
January 1995 |
|
608.02.50 |
Quality Control of Steel Fence Posts
Studded Tee Type |
January 1995 |
|
615.00.20 |
Preparing, Recording, and Transmitting
Approved List of Welding Electrodes and Fluxes (Replaced IM-29) |
January 1995 |
|
615.20.00 |
Field (Job Site) Welder Qualification
Procedures for Shielded Metal Arc Welding Flux Cored Arc Welding and Gas
Metal Arc Welding (Replaced IM-30) |
January 1995 |
|
616.14.50 |
Quality Assurance of Steel Bearing
Piles Item 616, Steel Sheet Piling, Welded and Seamless Steel Pipe Piles |
January 1995 |
|
642.03.50 |
Contractor's Quality Control for
Surface Waters & Sampling Procedures for Quality Determination |
January 1995 |
|
642.40.20 |
Analysis of Water |
January 1995 |
|
657.00.50 |
Method of Tensioning and Reporting
Torque of Bolts for New and Replacement Breakaway Sign Supports |
January 1995 |
|
661.00.00 |
Chemical Analysis of Aluminum Alloy |
January 1995 |
|
661.02.40 |
Sampling, Inspection, and Acceptance of
Signing Material |
June 1996 |
|
661.20.00 |
Procedure for Determining the Torque on
Tamper Resistant Hardware |
October 1996 |
|
679.03.00 |
Total Solids In Latex Polymer Modified
Concrete |
January 1995 |
|
688.02.20 |
Guide for Contractor's and Fabricator's
Quality Control Plan for Painting Structural Steel (Replaced MP
615.06.20) |
January 1995 |
| 688.03.20 |
Guide for
Developing the Contractor's Containment/Disposal Control Plan for Spent
Material Prior to Painting Existing Steel Structures |
January 1995 |
|
688.03.21 |
Procedures for Sampling "Spent
Material" During Removal or Cleaning of Existing Steel Structures
Prior to Repainting |
January 1995 |
|
688.03.22 |
Procedure for Testing "Spent
Material" Recovered During Paint Removal or Cleaning of Existing
Steel Structures |
January 1995 |
|
688.03.23 |
Evaluation and Approval for Laboratory
Testing of Solid Waste |
January 1995 |
| 700s |
|
700.00.00
|
Preparing Materials Procedures
|
January 1995
|
|
700.00.01 |
Sampling and Testing of Materials at
the Source (Replaced IM-17) |
May 2004 |
|
700.00.06 |
Aggregate Sampling Procedures (Replaced
ML-26) |
January 1995 |
|
700.00.22 |
Procedure for Determining an Adjusted
Pay Quantity Resulting From Excess Moisture in Aggregates |
January 1995 |
|
700.00.24 |
Nuclear Density Test By The Roller Pass
Methods |
October 1999 |
|
700.00.30 |
Certification of Batch Scales and
Calibration of Standard 50 Pound Test Weights (Replaced ML-23) |
June 2004 |
|
700.00.50 |
Procedure for Monitoring the
Contractor's Compaction Testing of Bituminous Concrete, Base Course,
Embankment, Sub-Grade and Pipe and Structural Backfill |
January 1995 |
|
700.00.51 |
Guide for Quality Control and
Acceptance Plans for Purchase Order Contracts for Stone and Aggregate
and for Abrasives |
July 2003 |
|
700.00.52 |
Guide for Source Rating System Relating
to Maintenance Contracts |
January 1995 |
|
700.00.53 |
Procedure for Evaluating Independent
Assurance Samples With Acceptance Samples |
July 2000 |
|
700.00.54 |
Procedure for Evaluating Quality
Control Sample Test Results with Verification Sample Test Results |
July 2000 |
|
700.00.55 |
Guidelines for Establishing Approved
Lists of Material and Sources |
October 1996 |
|
700.01.01 |
Method of Field Sampling and Field
Testing of Surface Water for Quality Determination |
January 1995 |
|
700.03.00 |
Procedure for Item Material
Certification |
September 2000 |
|
700.03.01 |
Documentation Procedure for Aggregate
Gradations and Bituminous Concrete Data |
DELETED |
|
700.03.50 |
Standard Method of Microscopic
Determination of Air-Void Content |
January 1995 |
|
700.03.52 |
Triaxial Compressive Strength of
Compacted Aggregate Specimens |
January 1995 |
|
700.04.10 |
Determining Application Rate of Ground
Agricultural Limestone Based on pH Tests |
January 1995 |
|
700.05.10 |
Quality Assurance of Fertilizer at
Source
Fertilizer Acceptance Criteria |
January 1995 |
|
701.01.11 |
Determination of Chemical Constituents
In Hydraulic Cement |
January 1995 |
|
701.01.10 |
Portland Cement Mill Certification |
January 1995 |
|
702.00.20 |
Determining Free Moisture In Fine
Aggregate Using a 26 Gram Speedy Moisture Tester |
January 1995 |
|
702.01.20 |
Method of Test for Percentage of Coal
and Lightweight Pieces |
|
|
702.01.25 |
Method of Test for Determining Mortar
Strength |
|
|
703.00.21 |
Standard Method of Test for Percent
Crushed Particles |
January 1995 |
|
703.00.22 |
Soundness of Aggregate Using Sodium
Sulfate |
January 1995 |
|
703.00.24 |
Source Control of Aggregate |
January 1995 |
|
703.00.25 |
Method of Determination of Percent of
Thin or Elongated Pieces of Coarse Aggregate |
January 1995 |
|
703.00.27 |
Standard Method of Test for Percent By
Weight for Shale in Crushed Aggregate |
January 1995 |
|
703.00.28 |
Method of Determining Expansion
Pressure of Compacted Aggregate Specimens |
January 1995 |
|
703.00.29 |
Insoluble Residue In Carbonate
Aggregate |
January 1995 |
|
703.00.30 |
Method of Preparation and Evaluation of
Aggregate for Soak Test |
January 1995 |
|
703.01.20 |
Standard Method of Test for Friable
Particles in Aggregate |
January 1995 |
|
707.02.13 |
Quality Control of Steel Sign Post,
Channel Bar Type |
January 1995 |
|
707.04.10 |
Guide for Approval of Pozzolanic Additives |
July 2003 |
|
708.40.00 |
Procedure for the Determination of
Structural Painting Film Thickness |
January 2005 |
|
709.01.50 |
Certification of Producers of Steel
Bars for Concrete Reinforcement |
January 1995 |
|
709.01.51 |
Acceptance Criteria for Epoxy Coated
Reinforcing Steel |
January 1995 |
|
709.15.50 |
Certification of Fabricators of
Corrosion Resistant Coated Dowel Bars in Basket Assembly |
January 1995 |
|
710.01.40 |
Quality Assurance of Wood Products |
January 1995 |
|
711.00.20 |
Paint Test Methods |
March 2005 |
|
711.00.21 |
Procedure for Approving Paint
Formulations and Production Batches |
December 1997 |
|
711.03.20 |
Air Content of Freshly Mixed Concrete
By the Volumetric Method |
DELETED |
|
711.03.23 |
Mix Design for Portland Cement Concrete |
April 2007 |
|
Spreadsheet |
Excel Spreadsheet for 711.03.23 |
|
711.03.25 |
Air Content of Freshly Mixed Concrete
By Chase Indicator |
DELETED |
|
711.03.26 |
Maintaining Specified Level of Strength
in Portland Cement Concrete |
January 1995 |
|
711.03.27 |
Instruction for Completion of Punch
Card HL-411 Concrete Batch Tickets |
deleted |
|
711.03.30 |
Quality Assurance of Reinforced
Concrete Culvert, Storm Drain and Sewer Pipe |
January 1995 |
|
711.03.31 |
Development and Use of the Equation for
Predicting Potential Strength of Portland Cement Concrete |
December 1996 |
|
711.20.59 |
Inorganic Zinc Primer Quality Assurance
Procedures |
January 1995 |
|
711.20.60 |
Intermediate Field Coat for Zinc Rich
Systems |
May 1995 |
|
711.22.22 |
Zinc Rich Low VOC System |
December 1999 |
|
711.35.50 |
Certification of Supplier of Epoxy
Coated Steel |
deleted |
|
712.04.50 |
Quality Assurance of Guardrail Beams,
Steel Guardrail Posts and Hardware (Replaced MP 707.02.12) |
October 1966 |
|
712.20.29 |
Method of Test of Cohesiometer Value of
Untreated Aggregate Base or Sub-Base |
deleted |
|
712.21.26 |
Procedure for Determining Random
Location of Compaction Tests |
October 1999 |
|
712.30.20 |
Capping Concrete Cylinders |
January 1995 |
|
712.40.01 |
Survey of Acoustical Waves Generated By
Vehicular Traffic |
January 1995 |
|
713.01.50 |
Procedure for the Quality Assurance of
Corrugated Metal Pipe (Replaced MP 707.02.10) |
January 1995 |
|
713.20.20 |
Silicon Content in AASHTO M-167 and
M-218 Materials |
January 1995 |
|
714.19.50 |
Quality Assurance of Corrugated
Polyethylene Pipe |
May 1995 |
|
715.07.20 |
Standard Method of Test for Determining
the Quality of Water Used with Hydraulic Cement |
January 1995 |
|
715.27.20 |
Test Methods for Determining Moisture
Content and Net Dry Weight of Wood Cellulose Fiber Mulches |
September
2003 |
|
715.28.50 |
Seed Acceptance Criteria |
January 1995 |
|
717.04.21 |
Guide for Quality Control of Compaction |
August 2000 |
| OTHER |
|
IM-18 |
Quality Assurance Procedures |
January 1995 |
|
IM-31 |
Preparing, Recording, and Transmitting
Information on Approved List of Welded Stud Sheer Connectors |
January 1995 |
|
MA-1 |
Operating and Emergency Procedures for
Nuclear Gauges |
August 2001 |
|
ML-25 |
Procedure for Monitoring the Sieve
Analysis of Fine and Coarse Aggregate |
September 1996 |
